Siser EasyPattern 12” Mermaid Scales Teal Heat Transfer Vinyl
EasyPatterns® are the wow factor you’re looking for! These pre-printed patterns eliminate the need for layering multiple solid colors, therefore eliminating extra weight on the garment! Available in styles ranging from classic to cool, there’s bound to be a pattern that’s perfect for your next project. EasyPatterns were designed to fit into a variety of vinyl cutters as easily as they fit into a variety of niches and trends. Simply cut in the positive (do not mirror) with the pattern facing up, weed away the excess from the static carrier, and mask with TTD High Tack and a squeegee. After heat application, the mask releases quick and easy while still warm. Mix and match EasyPatterns with other types of Siser HTV for extraordinary styles. Just be sure to keep EasyPatterns as the top layer for best results. With a semi-gloss finish and soft hand, EasyPatterns are the star of the show even when applied with a home iron!
TTD High Tack Mask is a second product that will be needed to apply all Siser Easypatterns.
EasyPatterns are 80 Microns / 3.1 Mils and are a PU composition.
Original price was: $12.00.$10.20Current price is: $10.20.
Description
Technical Specifications
| Application instructions (home iron) • Cut design in positive (do not mirror) • Weed excess material • Mask with TTD Easy Mask or TTD High Tack Mask • Set iron dial between Cotton and Linen • Cover with Parchment Paper or Heat Transfer Cover Sheet • Place on flat, hard surface (ironing board not recommended) • Press iron with medium/firm pressure (do not slide iron) • Press each section of design for 15 seconds • If areas of design lift after application, replace cover sheet and re-press for 10 seconds • Peel carrier hot or cold |
Application Instructions (heat press) • Cut material – DON’T MIRROR! • Weed excess material • Mask with TTD Easy Mask or TTD High Tack Mask • Cover design with Kraft Paper or Heat Transfer Cover Sheet • Preheat garment for 2-3 seconds • Apply design at 305°F/150°C • Use medium pressure for 10-15 seconds • Peel carrier hot or cold |
 |
Cricut: Blade: Standard Setting: Iron-on+ |
 |
Silhouette Cameo: Blade: Standard, 4 Material: Heat Transfer, Smooth Speed: 8 Force: 11 |
 |
Brother ScanNCut: Blade: Standard, 3 Cut Speed: 1 Cut Pressure: 5 |
 |
Roland GX/GS-24: Blade: 45° Gram Force: 180-190 Offset: .250 Speed: 30 cm/s |
 |
Graphtec: Blade: 45° Force: 17 Tool: CB09U+0 Speed: 30 cm/s |
 |
MH, SC2, LP3, and Titan1: Blade: 45°/60° Gram Force: 120-130 Speed: 300 mm/s *Blade Advancing Varies |
 |
Titan 2 & 3: Blade: 45°/60° Gram Force: 100-110 Speed: 300 mm/s *Blade Advancing Varies |
Settings may vary based on blade condition and age of machine. Always perform a test cut prior to cutting designs.
Laundering:
- Wait 24 hours before first wash
- Machine wash warm or cold / mild detergent
- Dry on normal dryer setting
- Do not dry clean
Technical Sheets / Safety Data Sheets / Documents
Video
Reviews
Only logged in customers who have purchased this product may leave a review.
You May Also Like
Related products
-
Graphtec CE7000-60 Plus 24” Plotter: Professional Vinyl Cutting Made Effortless
$1,895.00 -
Siser Easyweed 15” Stretch Royal Purple Heat Transfer Vinyl – Thin and Flexible HTV
$10.99 -
River City 20” Turquoise Foil Heat Transfer Vinyl – Metallic Brilliance
$12.00 -
Siser Easyweed 15” Stretch Bright Orchid Heat Transfer Vinyl – Thin and Flexible HTV
$10.99
Reviews