Franmar UV Ink Remover – Soy-Based, Eco-Friendly UV Ink Cleaner for Screen Printers
Franmar
UV inks cure under light and become extremely difficult to remove with standard cleaners. Franmar’s UV Ink Remover is the soy-based solution — formulated specifically to degrade UV inks from screen mesh without acetone, mineral spirits, or other toxic solvents. pH balanced at 4.65 and VOC content of just 1.6%, it’s one of the safest UV ink cleaners available for screen printing.
Price range: $29.00 through $414.00
Description
Franmar UV Ink Remover
UV inks are tough. They cure quickly, bond aggressively to mesh, and laugh at standard plastisol cleaners. Franmar UV Ink Remover is built for this — a soy-based formula that breaks down UV inks without requiring acetone, toluene, or other solvents that degrade mesh and create hazardous fumes. The low evaporation rate gives you more working time. At just 1.6% VOC, it’s significantly better for indoor air quality than conventional UV ink cleaners.
UV Ink Specialist
Formulated specifically for UV-cured inks. Bean-e-doo works on plastisol; Greeneway covers multiple types; UV Ink Remover is the dedicated solution for UV.
Extremely Low VOC
At 1.6% VOC (0.13 g/L), this is one of the lowest VOC UV ink removers available. Significantly better for indoor air quality than acetone-based alternatives.
Low Evaporation Rate
Stays active on the screen longer than fast-evaporating solvents. More working time means more thorough cleaning with less chemical waste.
pH 4.65 — Gentle Formula
Balanced pH means safer handling for press operators and reclaim room staff during repeated daily use.
Replaces Acetone & Mineral Spirits
The go-to replacement for shops that have been using acetone, toluene, or mineral spirits to fight UV ink — same results without the hazards.
Soy-Based
Made from American-grown soybeans. 100% biodegradable.
How to Use Franmar UV Ink Remover
Step 1 — Apply
Spray or pour a small amount of UV Ink Remover onto the screen.
Step 2 — Scrub
Scrub thoroughly with a shop towel, nylon brush, or Biggee™ pad. The low evaporation rate means you have more time to work.
Step 3 — Repeat on Back
Apply to and scrub the back (substrate side) of the screen as needed.
Step 4 — Rinse
Rinse both sides with high-pressure water to remove dissolved UV ink and chemical residue.
The Complete Franmar Screen Cleaning System
Franmar makes a soy-based, eco-friendly chemical for every step of the screen printing workflow — from on-press color changes through ink removal, emulsion stripping, haze removal, and mesh prep. All River City Supply Franmar products linked below:
1 · On-Press Cleanup
Franmar Color Change
Soy-based on-press ink remover for plastisol color changes. Replaces Methylene Chloride. No water rinse.
✔ No water rinse — wipe on, wipe off
2 · Ink Removal
Franmar Bean-e-doo
The original Franmar soy-based plastisol ink remover. Reclaim room use — scrub and rinse with water.
✔ Original Franmar formula — soy-based
2 · Ink Removal
Franmar Aqua-Wash
Water-based ink remover. Removes all WB inks, acts as screen opener on press. Eliminates ghost images.
✔ WB ink specialist — screen opener + remover in one
2 · Ink Removal
Franmar Greeneway
Multipurpose soy ink remover. Handles plastisol, UV, all-purpose, nylon jacket, and lacquer inks. Dilutable up to 50% with water.
✔ Any ink type — plastisol, UV, solvent, all-purpose
← THIS PRODUCT
2 · Ink Removal
Franmar UV Ink Remover
Soy-based UV ink remover. pH 4.65, VOC 1.6%. Removes UV inks from mesh without acetone or mineral spirits.
✔ UV ink specialist — pH 4.65, VOC 1.6%
2 · Ink Removal
Franmar Solvent Ink Remover
Eco-friendly replacement for mineral spirits and volatile solvents for solvent-based ink removal. Non-flammable, biodegradable.
✔ Non-flammable solvent ink remover
3 · Emulsion Removal
Franmar Strip-e-doo
Eco-friendly emulsion remover. Removes all brands of emulsion, capillary film, and stencils. Built-in degreaser with color-change indicator.
✔ Color changes when spent — built-in degreaser
3 · Emulsion Removal
Franmar UN-Lok
Gel formula for locked, hardened emulsion that standard removers can’t break down. Stays wet up to 24 hours. Works in 30 min or less.
✔ Saves screens from remeshing — gel stays 24 hrs
5 · Adhesive Cleanup
Franmar Ickee Stickee Unstuck
Pallet adhesive remover for spray adhesive buildup on platens, squeegees, machine parts, and shop surfaces.
✔ Spray, wait, wipe — removes pallet adhesive
4 · Mesh Prep
Franmar D-Grease
Screen degreaser for mesh prep before emulsion coating. Also cleans solvent residue after press cleanup.
✔ Pre-coating mesh prep — removes oil & solvent residue
4 · Haze Removal
Franmar D-Haze
Liquid haze and ghost image remover. Apply to dry or damp screen after emulsion removal — scrub and rinse.
✔ Liquid formula — use every reclaim
4 · Haze Removal
Franmar D-Haze Gel
Gel haze remover. Clings to mesh for targeted long-dwell applications. Up to 1 hour dwell. For stubborn ghost images.
✔ Gel clings — up to 1 hour dwell for tough stains
🧪 Franmar Screen Cleaning Workflow
| Step | Process | Franmar Product | Notes |
|---|---|---|---|
| 1 | On-Press Cleanup | Color Change | Quick color changes at press. No water rinse. Replaces Methylene Chloride. |
| 2 | Ink Removal | Bean-e-doo / Aqua-Wash / Greeneway / UV Remover / Solvent Remover | Remove ink from mesh. Product selection depends on ink type. |
| 3 | Emulsion Strip | Strip-e-doo / UN-Lok | Remove emulsion stencil. Strip-e-doo for routine reclaim; UN-Lok for locked emulsion. |
| 4 | Haze & Mesh Prep | D•Haze / D•Haze Gel / D•Grease | Remove ghost images. Degrease mesh before recoating. |
| 5 | Adhesive Cleanup | Ickee Stickee Unstuck | Remove pallet adhesive buildup from pallets, platens, and equipment. |
🏆 Why Order from River City Supply?
📦 Deep Inventory
Full Franmar line in stock year-round from San Antonio, TX — no waiting on backorders.
🚚 Same-Day Shipping
In-stock orders placed before 3:30 PM CT ship the same day.
🌡️ San Antonio Advantage
South Texas location — less freeze risk than northern warehouses year-round.
🎁 Free Shipping Over $200
Free ground shipping on all orders over $200.
📞 Expert Support
Call (512) 454-0505 — we know screen printing chemistry and can help you choose the right product.
⭐ 17+ Years in Business
Founded 2008. Serving screen printers nationwide since before soy-based chemistry was mainstream.
Technical Specifications
| Franmar UV Ink Remover — Technical Specifications | |
|---|---|
| Product Name | Franmar UV Ink Remover |
| Brand | Franmar Chemical — Made in USA |
| Type / Category | Ink Removal |
| Ink Compatibility | UV/Cured Inks |
| Base Formula | 100% American-grown soybeans |
| VOC / Odor | VOC 1.6% (15.29 lb/gal, 0.13 g/L) — extremely low |
| Eco Profile | Biodegradable, pH 4.65 — balanced and safe |
| Water Rinse Required | Yes — high-pressure water rinse |
| Yield | Contact us for yield data |
| Available Sizes | Quart, Gallon, 5-Gallon |
Technical Sheets / Safety Data Sheets / Documents
FREQUENTLY ASKED QUESTIONS
Why can’t I just use Bean-e-doo for UV inks?
Bean-e-doo is optimized for plastisol. UV inks cure differently and require specific solvation chemistry. Franmar UV Ink Remover is formulated for the particular bond UV inks form with mesh.
What’s the VOC content?
1.6% VOC — measured at 15.29 lb/gal or 0.13 g/L. Extremely low compared to acetone (100% VOC) and mineral spirits.
Does it work on partially cured UV ink?
Yes. The formula works on both fully cured and partially cured UV inks from screen mesh.
Do I need water to rinse?
Yes. After scrubbing, rinse both sides of the screen with high-pressure water to remove dissolved ink and chemical.
What’s the pH?
4.65 — mildly acidic and well-balanced for safe daily use.
Reviews
Only logged in customers who have purchased this product may leave a review.
You May Also Like
Related products
-
Chromaline Chroma/Fill Blockout – High-Visibility Screen Blockout for Precision Screen Printing
$34.99 -
Murakami MS Emulsion Reclaimable Hardener – Post-Exposure Stencil Hardener for Screen Printing
$49.99 -
Murakami 905 Blockout Blue – Fast-Drying Screen Blockout for Professional Screen Printing
$43.86 -
ProSoap Hand Cleaner – Industrial-Strength Hand Cleaner for Screen Printers & Shop Professionals
Price range: $49.99 through $299.99
Reviews