Embroidery Backing Tear ‘N Wash (2.0 oz.) Backing Squares 7.5″ x 7.5″ (250 Pack)

Directions for Using 7.5″ x 7.5″ Tear ‘N Wash (2.0 oz.) Backing Squares (250 Pack): Effortless Embroidery Stabilization and Cleanup:

1. Prepare Your Fabric: Begin by selecting the fabric for your embroidery project and ensuring it’s clean, smooth, and ready for stitching. Lay it on a flat surface.
2. Choose the Appropriate Square: From the 250 pre-cut 7.5″ x 7.5″ Tear ‘N Wash Backing Squares, select the appropriate square for your embroidery area. These convenient pre-cut squares eliminate the need for manual cutting.
3. Position the Square: Place the Tear ‘N Wash Backing Square beneath your fabric, aligning it with the area you’ll be embroidering. Ensure the square covers the entire design space.
4. Hoop Your Fabric: If using a hoop, carefully position your fabric and backing square into the hoop. Tighten the hoop’s screw to secure the fabric in place, ensuring it’s taut but not excessively stretched.
5. Embroider Your Design: Set up your embroidery machine with the desired design and thread colors. Begin the embroidery process, allowing the machine to stitch through both the fabric and the backing square.
6. Monitor the Process: As your machine embroiders, keep an eye on the stitching progress. The Tear ‘N Wash Backing is specifically designed to dissolve when washed.
7. Finishing Embroidery: Once your design is complete, gently remove the fabric from the hoop or frame. If there is any excess backing square outside the stitched area, you can easily tear it away.
8. Dissolve with Washing: After embroidery, launder your project as you normally would. The Tear ‘N Wash Backing Square will dissolve completely during the washing process, leaving no residue behind.
9. Enjoy Residue-Free Results: Once laundered, your embroidered item will showcase clean, residue-free stitching. Any remnants of the backing square that were not removed during the tearing process will dissolve away with regular washing.
10. Perfect for Visible Embroidery: The Tear ‘N Wash Backing is especially suitable for items where the back side of the embroidery is visible, such as towels, napkins, linens, and chair backs.
11. Convenient and Pre-Cut: The 7.5″ x 7.5″ Tear ‘N Wash Backing Squares come in a pack of 250 sheets. This convenient pre-cut size streamlines your embroidery process and cleanup.

Experience the convenience and effectiveness of Tear ‘N Wash Backing for your embroidery projects. Achieve clean, residue-free results with ease, knowing that your embroidery will maintain its integrity even after washing.