Grunig Coating Machine G-COAT 406S

Features:

• Recently developed coating machine of extremely compact and low-maintenance construction type
• The machine is available in two sizes, for screens up to 700 x 1000 mm or 1000 x 1400 mm (25 x 39 or 35 x 55 inch)
• The PLUG & COAT system has been designed for trouble-free installation and commissioning: unwrap – set up – coat
• The machine has been constructed as a bench-top model; it can be operated on any work surface that offers sufficient stability.
• To make sure that the machine can also be set up on the floor, an easy-to-mount sub-construction is available as an option.
• The upper screen holder can easily and rapidly be adjusted within a range of 250 to the max. height, to cater to the various screen formats.
• The screen holders can be adapted to match frame profile thicknesses between 5-25 mm or 20-40 mm.
• All the pertinent coating parameters can be smoothly and easily programmed by means of the control panel.
• This machine provides for one-sided or double-sided simultaneous screen coating.
• To optimize the coating surface, the frame profile height can be adjusted within a range of 25 and 100 mm via a rotary knob on the control panel.
• The contact pressure and the trough tipping procedures are controlled by the pneumatic system.
• Extremely smooth operation of the coating carriage thanks to the use of special sliding guides and a special toothed belt drive unit.
• Safely reproducible coating results with direct coating wet-on-wet or during subsequent coating.
• Easy-to-use manual functions Coating parameters
• Coating speed (15 – 65 mm/s)
• Number of coatings on squeegee side (0 – 10)
• Number of coatings on print side (0 – 10)
• Flow time (0 – 10 seconds)
• Frame profile height (25 – 100 mm)

Grunig 406 Brochure