River City 18” Hearts Pattern Heat Transfer Vinyl

Application Instructions (heat press)

• Cut material – don’t mirror!
• Weed excess material
• Mask with TTD Easy Mask
• Preheat garment for 2-3 seconds
• Apply design at 305°F/150°C
• Use medium pressure for 10-15 seconds
• Peel carrier hot or cold

Application instructions (home iron)

• Cut material – don’t mirror!
• Weed excess material
• Mask with TTD Easy Mask
• Set iron dial between Cotton and Linen
• Cover design with Kraft paper or non-stick cover sheet
• Place on flat, hard surface (ironing board not recommended)
• Press iron with medium/firm pressure (do not slide iron)
• Press each section of design for 15 seconds
• If areas of design lift after application, replace cover sheet
and re-press for 10 seconds
• Peel carrier hot or cold

EasyPatterns Apply to:

• 100% cotton
• Poly/cotton blends
• 100% polyester
• Leather

Laundering:

• Wait 24 hours before 1st wash
• Machine wash cold / mild detergent
• Dry on normal dryer setting
• Do not dry clean
• Do not bleach