Siser Easyweed 20” Stretch White Heat Transfer Vinyl – Single Yards
Siser is discontinuing Easyweed Stretch with no ETA of return. This is the last remaining stock available.
Activewear has met its match! EasyWeed Stretch by Siser delivers all the benefits of our EasyWeed heat transfer vinyl and combines it with super stretchability to create one remarkable HTV! The thinnest of any Siser material, EasyWeed Stretch has a true matte finish that’s available in over 20 popular colors! While EasyWeed Stretch is ideal for performance apparel from spandex to dri-fit, the soft hand and light weight often make it a favorite for other garments such as: tank tops, onesies, and almost anything else. Check out the Top Ten Siser Heat Transfer Vinyl Tips for other great uses for HTV! EasyWeed Stretch can even be cut with laser systems.
EasyWeed Stretch is 85 Microns / 3.35 Mils and is a PU composition.
$12.99
Description
Adheres To:
- 100% Cotton
- Poly / Cotton Blends
- 100% Uncoated Polyester
- Lycra / Spandex
Composition: Polyurethane
Blade: 45° or 60°
Thickness: 85 Microns/3.5 Mils
Layerable: Yes
Actual Width: 19.66″
Backing: Pressure Sensitive
Finish: True Matte Finish
Technical Specifications
| Application instructions (home iron) • Set iron dial between Cotton and Linen • Cover design with Multipurpose paper or Heat Transfer Cover Sheet • Place on flat, hard surface (ironing board not recommended) • Press iron with firm pressure (do not slide iron) • Press each section of design for 20 seconds • If areas of design lift after application, replace cover sheet and re-press for 5-10 seconds • Peel carrier hot or cold |
Application Instructions (heat press) • Cover design with Multipurpose paper or Heat Transfer Cover Sheet • Preheat garment for 2-3 seconds • Apply design at 320°F/160°C • Use firm pressure for 20 seconds • Peel carrier hot or cold |
 |
Cricut: Blade: Standard Setting: Iron-on |
 |
Silhouette Cameo: Blade: Standard, 4 Material: Heat Transfer, Smooth Speed: 8 Force: 4 |
 |
Brother ScanNCut: Blade: Standard, 2 Cut Speed: 1 Cut Pressure: 1 |
 |
Roland GX/GS-24: Blade: 45° Gram Force: 60-70 Offset: .250 Speed: 30 cm/s |
 |
Graphtec: Blade: 45° Force: 9-10 Tool: CB09U+0 Speed: 30 cm/s |
 |
MH, SC2, LP3, and Titan1: Blade: 45°/60° Gram Force: 80-85 Speed: 300 mm/s *Blade Advancing Varies |
 |
Titan 2 & 3: Blade: 45°/60° Gram Force: 80-85 Speed: 300 mm/s *Blade Advancing Varies |
Settings may vary based on blade condition and age of machine. Always perform a test cut prior to cutting designs.
Laundering:
- Wait 24 hours before 1st wash
- Machine wash cold / mild detergent
- Dry on normal dryer setting
- Do not dry clean
Technical Sheets / Safety Data Sheets / Documents
Video
Reviews
Only logged in customers who have purchased this product may leave a review.
You May Also Like
Related products
-
Sale!
Graphtec CE7000-130 Plus 50” Plotter – Quiet Performance for Wide-Format Cutting
Original price was: $5,164.50.$4,895.00Current price is: $4,895.00. -
River City 20” Fuzzy Foil Heat Transfer Vinyl Pattern – Metallic Brilliance
$12.00 -
Sale!
Siser EasyWeed 20” Royal Blue Twinkle Heat Transfer Vinyl – Dazzle with Sparkly Crafting Creations
Original price was: $12.50.$10.50Current price is: $10.50. -
Siser Easyweed 15” Stretch Burgundy Heat Transfer Vinyl – Thin and Flexible HTV
$10.99
Reviews