Printers Choice Chill White – Low Cure Plastisol Ink for Cotton & Blends

Application & Storage Guidelines:

• Recommended Fabrics: Ideal for light-colored 100% cotton or cotton/polyester blends. Utilize an underbase when printing on dark fabrics.
• Ink Application: Colors are ready for printing without modifications. If thinning is needed, add Curable Reducer (1% to 5% by volume).
• Screen Mesh & Emulsion: Optimal results with mesh counts ranging from 110 to 305. Use any direct or indirect lacquer resistant emulsion. Consider 35 to 70 micron capillary film for superior outcomes.
• Squeegee: For excellent results, use a 60-70 Durometer squeegee with a sharp edge. Alternatively, a 70-90-70 or 60-90-60 Triple Durometer squeegee with a sharp edge is recommended.
• Cure Temperature: Cure at 270 degrees for one to one and a half minutes, covering the entire ink film. Perform dryer temperature testing and wash tests on printed products before and during production.
• Clean-up: Utilize Printers Choice Ink Degradant or any environmentally friendly plastisol screen wash for effective clean-up.
• Ink Container Storage: Store ink containers in a controlled environment between 65°F to 90°F (18°C to 32°C). Avoid direct sunlight exposure and ensure containers are securely sealed.

Make the most of your screen printing experience by following these precise application and storage instructions. Achieve exceptional results with Printers Choice Chill White Non-Phthalate, Low Cure Plastisol Ink while maintaining proper storage conditions for ink longevity and performance.

It’s important to conduct a thorough testing process to ensure complete curing and achieve the desired print results. Remember, River City and its affiliates cannot be held responsible for product misuse or any issues stemming from inadequate curing. Always perform testing to guarantee optimal outcomes and quality prints.

Printers Choice Striker White LB Plastisol Ink Safety Data Sheet