Guides for this product
TW 11002 Red Shade Yellow – Solvent-Based Screen Printing Ink
TW Graphics
TW 11002 Red Shade Yellow is a warm, golden yellow that leans toward orange. In a formula it builds golds, ambers, oranges and warm tans. It is part of the TW 11000 Series Solvent-Based Screen Printing Ink. The TW Graphics 11000 Series is a one-component, gloss, chemical-resistant solvent-based screen printing ink. It prints on treated polyethylene and polypropylene, PVC, Tyvek, nylon fabric, leather, coated wood and coated metal. It air dries in 10-20 minutes or force dries in seconds, and suits banner, flag, metal sign and point-of-purchase printers.
$215.62
Description
TW 11002 Red Shade Yellow – Solvent-Based Screen Printing Ink
TW 11002 Red Shade Yellow is a warm, golden yellow that leans toward orange. In a formula it builds golds, ambers, oranges and warm tans. It is part of the TW 11000 Series Solvent-Based Screen Printing Ink.
The TW Graphics 11000 Series is a one-component, gloss, chemical-resistant solvent-based screen printing ink. It prints on treated polyethylene and polypropylene, PVC, Tyvek, nylon fabric, leather, coated wood and coated metal. It air dries in 10-20 minutes or force dries in seconds, and suits banner, flag, metal sign and point-of-purchase printers.
About TW 11000 single-pigment mixing colors
The 11000 mixing colors (11001 to 11011) each contain one pigment, so you can build custom and matched colors on plastics, vinyl and coated surfaces with repeatable formulas. They share the line’s gloss finish, 110 to 305 mesh range and 10 to 20 minute air dry.
Print settings at a glance
| Setting | Value |
|---|---|
| Mesh | 110-305 (43-120 cm) mono polyester |
| Coverage | 1,400-2,000 sq ft/gal |
| Air dry | 10-20 minutes at room temp |
| Force dry | Seconds at 90-150°F (32-66°C) |
| Thinner | 1073 or 11017, up to 5-10% by wt |
| Retarder | 1091, up to 5-10% by wt |
How to use it
- 1Stir the ink thoroughly before use.
- 2Use 110 to 305 mesh monofilament polyester with a solvent-proof or water-soluble emulsion and water-soluble blockout.
- 3Print with a sharp single-durometer 65-75 squeegee.
- 4Adjust viscosity with 1073 Thinner at up to 5-10% by weight; add 1091 Retarder up to 5-10% for fine detail, slow cycles or hot shops.
- 5For extra chemical resistance and adhesion, add 2919 Adhesion Promoter/Catalyst at 2-5% and mix only what you will use within 4-6 hours.
Before you buy
The complete TW 11000 Series Solvent-Based Screen Printing Ink guide
The 11000 Series is a flexible, one-component, gloss, chemical-resistant solvent-based ink system. It is formulated to resist plasticizer migration and uses automotive-grade pigments. Read the full TW 11000 Series Solvent-Based Screen Printing Ink guide for substrates, durability, additives and every color in the line.
Mixing with TW 11002 Red Shade Yellow
Good starting points for custom colors. Mix by weight on a gram scale, record the formula and test-print before a run.
Related TW colors
Sizes & SKUs
Order by SKU or TW code, or call us — it is the fastest way to reorder exactly what you ran last time.
| Size | SKU |
|---|---|
| 1 Gallon | TW 11002 Red Shade Yellow Solvent Based Ink – Gallon |
Everything you need to print it
Screens & mesh
Pre-stretched screens and mesh by the yard in the counts this ink prints best through.
Emulsion & film
Solvent-resistant emulsion or capillary film, applied with a scoop coater.
Exposure
Burn sharp stencils on an exposure unit.
Squeegees
Sharp, even blades from our squeegee selection.
Tape & blockout
Seal screen edges with screen tape.
Drying & curing
Drying racks and forced-air dryers to speed production.
Clean-up
Press wash, ink degradents, emulsion remover and haze remover to reclaim screens.
All solvent inks
UV inks
Questions about TW 11002 Red Shade Yellow?
Tell us the substrate, the artwork and your press and we will tell you exactly what to run. Same-day shipping on orders before 3:30 PM CT from San Antonio, TX.
Technical Specifications
TW 11002 Red Shade Yellow — technical specifications
| Specification | Detail |
|---|---|
| Product code | TW 11002 |
| Color / product | Red Shade Yellow |
| Type | single-pigment mixing color |
| Ink type | Solvent-based, one component |
| Finish | Gloss |
| Mesh | 110-305 (43-120 cm) mono polyester |
| Stencil | Solvent-proof or water-soluble emulsion |
| Squeegee | Sharp, single durometer 65-75 |
| Coverage | 1,400-2,000 sq ft/gal |
| Air dry | 10-20 minutes at room temp |
| Force dry | Seconds at 90-150°F (32-66°C) |
| Thinner | 1073 or 11017, up to 5-10% by wt |
| Retarder | 1091, up to 5-10% by wt |
| Adhesion promoter | 2919, 2-5% by wt |
| Pot life with 2919 | 4-6 hours |
| PE/PP surface tension | 38 dyne/cm or higher |
| Outdoor life | Up to 2 years (blues 1 year) |
| Clean-up | Solvent-ink press wash |
| Storage | Room temp, below 100°F (38°C) |
| Package sizes | Quart, gallon, 5-gallon pail |
| Flash point (base) | 45°C (114°F) TCC |
| SKUs | TW 11002 Red Shade Yellow Solvent Based Ink – Gallon |
Specifications are from TW Graphics. Always test print on your substrate before a production run. Questions? Call (512) 454-0505.
Technical Sheets / Safety Data Sheets / Documents
TW 11002 Red Shade Yellow — documents
FREQUENTLY ASKED QUESTIONS
Frequently asked questions
What is TW 11002 Red Shade Yellow?
TW 11002 Red Shade Yellow is a warm, golden yellow that leans toward orange. In a formula it builds golds, ambers, oranges and warm tans. It is part of the TW 11000 Series Solvent-Based Screen Printing Ink. The TW Graphics 11000 Series is a one-component, gloss, chemical-resistant solvent-based screen printing ink. It prints on treated polyethylene and polypropylene, PVC, Tyvek, nylon fabric, leather, coated wood and coated metal. It air dries in 10-20 minutes or force dries in seconds, and suits banner, flag, metal sign and point-of-purchase printers.
Why use single-pigment colors for matching?
Each one has a single pigment, so mixes stay clean and repeatable.
Are there concentrates for the 11000 Series?
Yes. SB-01 to SB-11 concentrates match these colors. They are not press-ready and must be mixed into 11030 Mixing Clear or white at 30% or less by weight.
What substrates does 11000 Series ink print on?
Treated polyethylene and polypropylene, PVC, Tyvek, nylon fabric, leather, coated wood, coated metal and plastic sheeting. Always test your specific material first.
How fast does it dry?
10 to 20 minutes air dry at room temperature, or a few seconds in a forced-air dryer at 90-150°F.
What mesh count should I use?
110 to 305 monofilament polyester; use the finer end for halftones and fine detail.
How do I thin it?
Add 1073 Thinner up to 5-10% by weight. Over-reducing can cause blocking and slower drying.
When should I use 1091 Retarder?
For fine detail, slow print cycles or high shop temperatures, at up to 5-10% by weight.
How do I improve adhesion on polyethylene or polypropylene?
Make sure the surface measures 38 dyne/cm or higher, and add 2919 Adhesion Promoter/Catalyst at 2-5% by weight. Mixed ink must be used within 4-6 hours.
Is it rated for outdoor use?
Yes, up to 2 years exterior life on most substrates; Reflex Blue and Ultra Blue are rated up to 1 year. Expect slight color and gloss change.
Can I clean up with mineral spirits or lacquer thinner?
No. Use a press wash and reclaimer made for solvent-based inks.
Can I print four-color process with it?
Yes. 11040-11043 are Advanced Color Gamut halftone yellow, magenta, cyan and black, with 11044 Halftone Extender Base.
Reviews
Only logged in customers who have purchased this product may leave a review.
Reviews