Printers Choice Screen Opener – Effortless Screen Cleaning Solution
The printer’s choice screen opener is an essential tool used in the screen printing process. It is designed to unclog screens that have dried or partially dried ink, allowing for smoother printing and increased productivity.
This screen opener is specifically formulated to dissolve stubborn ink residues and unclog fine mesh screens without damaging the mesh or emulsion layer. It effectively breaks down dried ink particles, enabling easy removal with a simple wipe or rinse.
Made with high-quality and safe ingredients, this screen opener is suitable for use on various types of screens, including those with solvent-based, water-based, or UV inks. It is also compatible with different types of emulsions, ensuring versatility in any screen printing setup.
The printer’s choice screen opener is designed for convenience and ease of use. It comes in a practical spray bottle, allowing for precise application and minimizing waste. It is recommended to spray the opener directly onto the affected area, allowing it to penetrate and dissolve the dried ink. Depending on the level of ink build-up, it may require some agitation or scrubbing with a soft brush or sponge to completely remove the residues.
Apart from unclogging screens, this screen opener can also be used for routine screen maintenance to prevent ink build-up and extend the lifespan of screens. Regular use of the printer’s choice screen opener will help ensure optimal print quality, sharper details, and consistent ink flow.
Whether you are a beginner or an experienced screen printer, the printer’s choice screen opener is an essential tool that helps maintain the efficiency and longevity of your screens. With its powerful formula, ease of use, and compatibility with various ink types and emulsions, it is a reliable choice for any screen printing operation.
- Opens dried-up areas on screens used by screen printers and signs/display personnel
- Compatible with all types of screen printing inks
- Regular use helps to prevent clogging and work delays
- Guaranteed to leave no film
- For use on screens made with photogenic (direct or indirect), stencil or lacquer-proof knife-cut films only
Using Printer’s Choice Screen Opener Spray is a simple and effective way to clear clogged screens and maintain the productivity of your screen printing process. Here’s a step-by-step guide on how to use the spray:
Step 1: Prepare Your Workspace Ensure you are working in a well-ventilated area or use a screen printing spray booth. It’s essential to have proper airflow during the application process to avoid inhaling fumes from the spray.
Step 2: Shake the Can Before using the Screen Opener Spray, shake the can vigorously to ensure that the contents are thoroughly mixed and ready for application.
Step 3: Identify the Clogged Area Inspect your screen and identify the clogged or blocked regions where the ink is not passing through the mesh correctly. These areas might be causing issues during printing, resulting in poor print quality or inconsistent ink flow.
Step 4: Spray the Screen Opener Hold the can approximately 6 to 8 inches away from the clogged area on the printing side of the screen. Spray the Screen Opener directly onto the blocked parts, applying a light and even coat.
Step 5: Wait and Reapply if Needed Allow the Screen Opener to work for a few seconds, depending on the severity of the clog. In some cases, you may need to repeat the application to ensure the blockage is adequately dissolved. Avoid using excessive force when spraying, as it may damage the screen.
Step 6: Test the Screen After applying the Screen Opener, test the screen by running a few test prints. The spray should have effectively dissolved the ink, allowing for smooth and consistent ink flow through the mesh.
Step 7: Clean the Screen After resolving the clog, clean the screen thoroughly to remove any residual Screen Opener and dissolved ink. Use a suitable screen wash or cleaning solvent to ensure the screen is ready for the next printing job.
Step 8: Proper Storage After using the Screen Opener Spray, make sure to close the cap tightly and store the can in a cool and dry place. This will help preserve the effectiveness of the product for future use.
Using Printer’s Choice Screen Opener Spray will help you maintain the efficiency of your screen printing setup and prevent delays caused by clogged screens. Remember to follow the safety guidelines on the product label and always use the spray as directed by the manufacturer.
- Size 20 oz. can
- Net Weight 15 oz.
- Units/Pack 12 cans
Technical Sheets / Safety Data Sheets / Documents
Only logged in customers who have purchased this product may leave a review.