AWT Pro Angle 2 Dual-Sided Scoop Coater

Coating a screen with emulsion using the AWT Pro Angle 2 Dual Sided Scoop Coater is a straightforward process. Please follow these step-by-step instructions to achieve optimal results:

1. Prepare your screen: Make sure your screen is clean and dry. Remove any debris or dust particles that could affect the quality of your coating.

2. Mix the emulsion: Prepare your emulsion according to the manufacturer’s instructions. Ensure that it is well-mixed and free from any clumps or lumps.

3. Select the desired edge: The Pro Angle 2 Scoop Coater features both a dull edge and a sharp edge. The dull edge puts down more emulsion, creating a thicker stencil. The sharp edge puts down less emulsion, resulting in a thinner stencil. Choose the edge that aligns with your desired stencil thickness.

4. Position the coater: Hold the Pro Angle 2 coater at an angle of 45 degrees with one end of the trough resting against the screen.

5. Pour the emulsion: Pour a sufficient amount of emulsion onto the edge of the coater, accommodating the size of your screen.

6. Start coating: With a steady and consistent motion, pull the coater across the screen while maintaining the 45-degree angle. Apply gentle pressure to evenly distribute the emulsion.

7. Coat in one direction: For the best results, consistently coat in one direction only. Avoid going back and forth, as this can result in uneven coating and potential streaks.

8. Achieve even coverage: To ensure uniform coating, pass the coater over the screen multiple times if necessary. If using the dull edge, additional passes may be needed to build a thicker stencil.

9. Optional flood coating: Once you have completed the coating process, you can perform a flood coating, which involves pouring a small amount of emulsion across the coated screen. Use a squeegee or coating trough to spread the emulsion evenly, removing any excess.

10. Allow to dry: After coating, place the screen in a clean and dust-free area to dry. Follow the manufacturer’s instructions for the recommended drying time.

Note: Always refer to the manufacturer’s guidelines for specific emulsion mixing ratios, exposure times, and any other factors that may impact the stencil development process. Additionally, be aware that the choice of using the dull or sharp edge of the coater will affect the stencil thickness, allowing for more versatility in your screen printing applications.