Sale!

Siser EasyPattern 12” Green Camo Heat Transfer Vinyl

Siser

EasyPatterns® are the wow factor you’re looking for! These pre-printed patterns eliminate the need for layering multiple solid colors, therefore eliminating extra weight on the garment! Available in styles ranging from classic to cool, there’s bound to be a pattern that’s perfect for your next project. EasyPatterns were designed to fit into a variety of vinyl cutters as easily as they fit into a variety of niches and trends. Simply cut in the positive (do not mirror) with the pattern facing up, weed away the excess from the static carrier, and mask with TTD High Tack and a squeegee. After heat application, the mask releases quick and easy while still warm. Mix and match EasyPatterns with other types of Siser HTV for extraordinary styles. Just be sure to keep EasyPatterns as the top layer for best results. With a semi-gloss finish and soft hand, EasyPatterns are the star of the show even when applied with a home iron!

TTD High Tack Mask is a second product that will be needed to apply all Siser Easypatterns. 

EasyPatterns are 80 Microns / 3.1 Mils and are a PU composition.

$10.20

13 in stock

QuantityBulk Purchase Pricing
1 - 4$10.20 Per Item
5 - 9$8.50 Per Item
10 - 24$7.65 Per Item
25 or more$7.14 Per Item
SKU: Siser EP12 Green Camo Categories: ,

Description

Technical Specifications

Application instructions (home iron)

• Cut design in positive (do not mirror)
• Weed excess material
• Mask with TTD Easy Mask or TTD High Tack Mask
• Set iron dial between Cotton and Linen
• Cover with Parchment Paper or Heat Transfer Cover Sheet
• Place on flat, hard surface (ironing board not recommended)
• Press iron with medium/firm pressure (do not slide iron)
• Press each section of design for 15 seconds
• If areas of design lift after application, replace cover sheet
and re-press for 10 seconds
• Peel carrier hot or cold
Application Instructions (heat press)

• Cut material – DON’T MIRROR!
• Weed excess material
• Mask with TTD Easy Mask or TTD High Tack Mask
• Cover design with Kraft Paper or Heat Transfer Cover Sheet
• Preheat garment for 2-3 seconds
• Apply design at 305°F/150°C
• Use medium pressure for 10-15 seconds
• Peel carrier hot or cold

 

Cricut:   Blade: Standard   Setting: Iron-on

Silhouette Cameo:   Blade: Standard, 3   Material: Heat Transfer, Smooth   Speed: 8   Force: 6

Brother ScanNCut:   Blade: Standard, 2   Cut Speed: 1   Cut Pressure: 1

Roland GX/GS-24:   Blade: 45°   Gram Force: 80-90   Offset: .250   Speed: 25-50 cm/s

Graphtec:   Blade: 45°   Force: 9   Tool: CB09U+0   Speed: 25 cm/s

MH, SC2, LP3, and Titan1:   Blade: 45°/60°   Gram Force: 80-85   Speed: 300 mm/s    *Blade Advancing Varies

Titan 2 & 3:   Blade: 45°/60°    Gram Force: 60-65   Speed: 300 mm/s   *Blade Advancing Varies


Settings may vary based on blade condition and age of machine. Always perform a test cut prior to cutting designs.

Laundering:

  • Wait 24 hours before first wash
  • Machine wash cold / mild detergent
  • Dry on normal dryer setting
  • Do not dry clean

Technical Sheets / Safety Data Sheets / Documents

Video

Product categories

Reviews

Reviews

Only logged in customers who have purchased this product may leave a review.

You May Also Like

Additional Options

×