Guides for this product
TW 5003 Yellow Shade Red – Gloss Water-Based Poster Ink
TW Graphics
TW 5003 Yellow Shade Red is a warm red that leans toward orange. In a formula it builds scarlets, orange-reds and warm brick tones. It is part of the TW 5000 Series Gloss Water-Based Poster Ink. Its closest PANTONE equivalent is PANTONE Orange 021 C. TW Graphics 5000 Series is a one-component, high-gloss water-based screen printing ink for posters, card stock, point-of-purchase displays and many plastics, including Coroplast, styrene, PVC and polycarbonate. It air dries in 20 to 30 minutes or force dries in seconds, cleans up with water-based press wash, and suits poster, sign and fine art printers.
Price range: $104.50 through $209.03
Description
TW 5003 Yellow Shade Red – Gloss Water-Based Poster Ink
TW 5003 Yellow Shade Red is a warm red that leans toward orange. In a formula it builds scarlets, orange-reds and warm brick tones. It is part of the TW 5000 Series Gloss Water-Based Poster Ink. Its closest PANTONE equivalent is PANTONE Orange 021 C.
TW Graphics 5000 Series is a one-component, high-gloss water-based screen printing ink for posters, card stock, point-of-purchase displays and many plastics, including Coroplast, styrene, PVC and polycarbonate. It air dries in 20 to 30 minutes or force dries in seconds, cleans up with water-based press wash, and suits poster, sign and fine art printers.
About TW 5000 single-pigment mixing colors
The TW 5000 mixing colors (codes 01 to 11) each contain one pigment, so you can build custom and matched colors by weight with predictable results. They dry to the same gloss finish as the rest of the 5000 line and share its mesh, drying and clean-up guidelines.
Print settings at a glance
| Setting | Value |
|---|---|
| Mesh count | 200-380 (80-150/cm) mono polyester |
| Coverage | 1,400-2,000 sq ft/gal (33-47 m²/L) |
| Air dry | 20-30 minutes at room temperature |
| Force dry | Seconds at 150°F (66°C) |
| Thinner | Z1820 or water, 5-10% max by wt |
| Retarder | Z1822 / Z1823, 5-10% max by wt |
How to use it
- 1Stir the ink thoroughly before use.
- 2Coat the screen with a solvent- and water-proof emulsion (dual-cure recommended) on 200 to 380 mesh, and let it dry fully before exposure.
- 3Use a sharp 70 to 85 durometer polyurethane squeegee.
- 4If needed, reduce with Z1820 thinner or water, no more than 5 to 10% by weight; use Z1822 or Z1823 retarder sparingly for fine detail or slow print cycles.
- 5For Coroplast or extra chemical resistance, add 2 to 3% WB Activator by weight and use within about 24 hours.
Before you buy
The complete TW 5000 Series Gloss Water-Based Poster Ink guide
Air dries in 20 to 30 minutes at room temperature and force dries in seconds at 150°F (66°C). Covers 1,400 to 2,000 square feet per gallon, depending on substrate, squeegee and press setup. Read the full TW 5000 Series Gloss Water-Based Poster Ink guide for substrates, durability, additives and every color in the line.
Mixing with TW 5003 Yellow Shade Red
Good starting points for custom colors. Mix by weight on a gram scale, record the formula and test-print before a run.
Related TW colors
Sizes & SKUs
Order by SKU or TW code, or call us — it is the fastest way to reorder exactly what you ran last time.
| Size | SKU |
|---|---|
| Quart | TW 5003 Yellow Shade Red-Qt |
| Gallon | TW 5003 Yellow Shade Red-01 |
Everything you need to print it
Screens & mesh
Pre-stretched screens and mesh by the yard in the counts this ink prints best through.
Emulsion & film
Water-resistant emulsion or capillary film, applied with a scoop coater.
Exposure
Burn sharp stencils on an exposure unit.
Squeegees
Sharp, even blades from our squeegee selection.
Tape & blockout
Seal screen edges with screen tape.
Drying & curing
Drying racks and forced-air dryers to speed production.
Clean-up
Press wash, ink degradents, emulsion remover and haze remover to reclaim screens.
TW 5500 Flat series
Additives
Questions about TW 5003 Yellow Shade Red?
Tell us the substrate, the artwork and your press and we will tell you exactly what to run. Same-day shipping on orders before 3:30 PM CT from San Antonio, TX.
Technical Specifications
TW 5003 Yellow Shade Red — technical specifications
| Specification | Detail |
|---|---|
| Product code | TW 5003 |
| Color / product | Yellow Shade Red |
| Type | single pigment mixing color |
| PANTONE equivalent | PANTONE Orange 021 C |
| Ink type | One-component water-based |
| Finish | Gloss |
| Substrates | Card stock, plastics, Tyvek, wood |
| Mesh count | 200-380 (80-150/cm) mono polyester |
| Stencil | Solvent- and water-proof emulsion |
| Recommended emulsion | Dual-cure |
| Squeegee | Sharp 70-85 durometer polyurethane |
| Coverage | 1,400-2,000 sq ft/gal (33-47 m²/L) |
| Air dry | 20-30 minutes at room temperature |
| Force dry | Seconds at 150°F (66°C) |
| Thinner | Z1820 or water, 5-10% max by wt |
| Retarder | Z1822 / Z1823, 5-10% max by wt |
| Defoamer | 5100 Defoamer, 1-2% by weight |
| Flattening powder | 1-8% by weight |
| Thickener | 5009 Liquid Thickener, 1/2-1% by wt |
| Activator | WB Activator, 2-3% by weight |
| Activator pot life | About 24 hours, reactivate once |
| Exterior durability | Up to 5 years (most substrates) |
| Clean-up | Water-based press wash |
| Storage | Room temp, below 100°F (38°C) |
| Freeze protection | Protect from freezing |
| Package sizes | Qt, gal, 5-gal; 30/50-gal drums |
| Pigments | Automotive grade |
| Color concentrates | WB series, max 30% by weight |
| Made in | USA |
| Reflex/Ultra Blue outdoor | Up to 2 years |
| SKUs | TW 5003 Yellow Shade Red-Qt, TW 5003 Yellow Shade Red-01 |
Specifications are from TW Graphics. Always test print on your substrate before a production run. Questions? Call (512) 454-0505.
Technical Sheets / Safety Data Sheets / Documents
TW 5003 Yellow Shade Red — documents
FREQUENTLY ASKED QUESTIONS
Frequently asked questions
What is TW 5003 Yellow Shade Red?
TW 5003 Yellow Shade Red is a warm red that leans toward orange. In a formula it builds scarlets, orange-reds and warm brick tones. It is part of the TW 5000 Series Gloss Water-Based Poster Ink. Its closest PANTONE equivalent is PANTONE Orange 021 C. TW Graphics 5000 Series is a one-component, high-gloss water-based screen printing ink for posters, card stock, point-of-purchase displays and many plastics, including Coroplast, styrene, PVC and polycarbonate. It air dries in 20 to 30 minutes or force dries in seconds, cleans up with water-based press wash, and suits poster, sign and fine art printers.
What PANTONE color is TW 5003 Yellow Shade Red?
TW 5003 Yellow Shade Red is the closest TW standard match to PANTONE Orange 021 C. PANTONE equivalents are close visual matches, not exact formulations, so print a test on your stock and compare it to a current PANTONE guide. Download the TW 5000 and 5500 PANTONE equivalent guide from the Documents tab.
Why use single-pigment colors instead of standard colors for matching?
Each mixing color has only one pigment, so formulas stay clean and repeatable. Mixing multi-pigment colors together tends to dull the result.
Can I print a mixing color straight from the can?
Yes. They are press-ready inks with the same drying and mesh guidelines as the rest of the line. Most shops use them as building blocks for custom colors.
Are there concentrates that match these colors?
Yes. WB-01 to WB-11 concentrates share these pigment names. Add up to 30% by weight to 5030 Clear Gloss Base or white.
What finish does the 5000 Series have?
A high-gloss finish. For a flat look, choose the 5500 Series or add 1 to 8% flattening powder.
How fast does it dry?
About 20 to 30 minutes in open air at room temperature, or seconds in a dryer at 150°F (66°C).
Will it print on Coroplast?
Yes, on treated Coroplast and fluted polyolefin, with the WB activator added for chemical resistance.
What mesh should I use?
200 to 380 monofilament polyester mesh.
Can I thin it with water?
Yes. Use water or Z1820 thinner, up to 5 to 10% by weight. Over-reducing slows drying and can cause blocking.
How long will prints last outdoors?
Up to five years on most substrates. Reflex Blue and Ultra Blue are rated up to two years.
Can I print four-color process?
Yes. The 5040 to 5043 halftone colors and 5044 Halftone Extender Base are built for halftone work.
Reviews
Only logged in customers who have purchased this product may leave a review.
Reviews