Matsui Gold Shimmer 620 Water Base Ink – Soft Metallic Brilliance

Technical Specifications – Matsui Gold Shimmer 620 Water Base Screen Printing Ink:

Product Information:

• Provides a decorative metallic finish on various substrates:
  • Cotton
  • Cotton/polyester blends
  • Cotton/rayon blends

Application Information:

• Mesh: Recommended mesh count of 80 – 120/inch (31-47/cm) for optimal results.
• Stencil: Use a water-proof direct emulsion or capillary film for precise stencils.
• Squeegee: Utilize a square-edge, 60-80 durometer blade for smooth application.
• Printing: Print directly or mix with 301 Neo pigments for versatility on white and colored fabrics.
• Drying: Cure for 2.5 to 3 minutes at 320°F (160°C) or use an air flow dryer for efficient curing.
• Clean up: Easily clean with water and mild soap or detergent.

Special Recommendations:

• Metallic Binder 301 should be mixed in clean vessels using clean mixing blades and utensils to avoid contamination.
• Metallic Binder 301 is compatible with dry cleaning and ironing processes.
• For enhanced performance, consider using Retarder MG (1-5%) to extend open time in the screen.
• Improve wash fastness with Fixer WF-N (1-5%).
• Enhance ink penetration into the garment with Softener MG (1-4%).
• Achieve desired ink thickness with Thickener B (.25-1%).
• Reduce ink viscosity using RV Additive (1-3%).

For added convenience and consistent results, consider using Matsui Quick Additive (6-9%). This all-in-one solution includes all three additives (Retarder, Fixer N, and Softener) in a balanced blend, streamlining the ink-mixing process and ensuring optimal printability. The Matsui Quick Additive provides a hassle-free way to achieve the desired characteristics in your prints, making it a preferred choice for efficient and exceptional screen printing results.

Technical Data Sheet:

• Wet Ink Tack: Low
• After Flash Tack: Low
• Printability: Excellent
• Surface Appearance: Matte
• Opacity/Viscosity: High/Low
• Bleed Resistance: None
• Flash Temperature: 160°F (71°C)/decreases with deposit thickness
• Cure Temperature: 320°F (160°C)
• Squeegee Hardness: Medium
• Squeegee Blade: Sharp
• Squeegee Angle: 45 degrees to screen
• Squeegee Speed: Medium
• Underlay: N/A
• Emulsion: Direct or indirect
• Mesh Count: 86-110 mc in (34-43 mc cm)
• Thinner: RV Additive
• Thickener: Thickener B
• Storage: 65°F to 95°F (18°C to 35°C). Avoid direct sun.
• Cleanup: Water and mild soap or detergent
• Color Range: Pearlescent
• Substrate Type: All
• Substrate Color(s): Light, Medium, and Dark Fabrics

Regulatory Compliance:

• Matsui Shikiso Chemical Co, LTD attests to compliance with major regulated substances.
• Meets strict requirements for various substances, including formaldehyde, heavy metals, phthalate content, organotin compounds, carcinogens, allergens, and more.
• Matsui products are manufactured under strict quality control, with no intentional use of heavy metals or raw materials containing them.
• Official tests are not conducted on each raw material purchased by Matsui, and the possibility of micro-level contamination by other factors exists. However, products remain compliant with regulatory standards.

Experience the brilliance and sophistication of Matsui Gold Shimmer 620 Water Base Screen Printing Ink. With its easy mixing and printing, unmatched softness, and compliance with safety regulations, this ink promises exceptional results on various fabrics. Create captivating metallic finishes that impress and endure, making your designs shine with excellence.

Matsui Gold Shimmer Base Technical Data Sheet

Matsui Gold Shimmer Base Safety Data Sheet