ICC 935 Ready-To-Use Emulsion Remover – Fast, Reliable Total Screen Reclaim
ICC Chemicals
ICC 935 Ready-To-Use Emulsion Remover is a fast-acting, professional reclaiming solution designed to remove even the most difficult screen printing emulsions. Formulated for total screen reclaim, ICC 935 effectively breaks down direct emulsions, indirect emulsions, and capillary film without dilution—making it a convenient, no-mix solution for busy print shops.
This ready-to-use emulsion remover is ideal for manual reclaiming and delivers consistent results when paired with proper dwell time and pressure washing. ICC 935 works best after ink has already been removed using a press wash or ink degradent, allowing the chemistry to focus entirely on dissolving the stencil.
Trusted by professional screen printers, ICC 935 provides strong reclaiming power while remaining easy to use and dependable across a wide range of emulsion systems.
$29.99
Description
ICC 935 Ready-To-Use Emulsion Remover Key Features & Benefits:
- Ready-to-use formula – no dilution required
- Fast-acting emulsion breakdown for efficient reclaiming
- Removes difficult direct, indirect, and capillary film emulsions
- Designed for total screen reclaim
- Ideal for manual reclaiming workflows
- Works best with pressure washing for clean results
- Reliable performance on stubborn or aged emulsions
- Trusted ICC screen printing chemistry
Recommended Application:
- Pour ICC 935 into a chemical-resistant spray bottle. Do not dilute.
- Apply to a wet screen, coating both sides of the mesh evenly.
- Allow product to dwell for approximately 60 seconds.
- Rinse thoroughly with water—pressure washing provides best results.
For difficult emulsions, increase dwell time and/or agitate with a heavy-duty scrub brush before pressure washing.
⚠️ Important: Never allow ICC 935 to dry on the screen. Dried emulsion remover can permanently lock the stencil, making the screen unreclaimable.
Ideal For:
- Screen printers performing manual screen reclaim
- Shops needing a ready-to-use emulsion remover
- Removing tough or stubborn emulsion systems
- Reclaiming screens coated with capillary film
ICC 935 Ready-To-Use Emulsion Remover delivers dependable reclaiming power, simple application, and professional results—making it a solid choice for any screen printing shop.
Technical Specifications
Application Pro Tip for Reclaiming Multiple Screens:
- Apply 935 Emulsion Remover to both sides of a wet screen, quickly scrub each side with a scrub brush to better disperse product and loosen emulsion. Do not rinse.
- Set screen aside and repeat Step 1 with the next screen.
- Place screens back-to-back with mesh facing towards each other (this allows the screens to better soak in the chemical)
- Move onto the next set of (2) screens and repeat steps 1-3.
- At this point, user should have (4) screens coated with 931 Ink Degradent and each pair of screens should be facing mesh-to-mesh.
- Using a pressure washer, rinse the 1st screen in your cycle. Repeat for the rest of the screens in your cycle.
- ***Do not exceed 4-6 screens at a time, as the drying of 935 Emulsion Remover will have the adverse effect. Ideal number of screens in your cycle will be dependent on the type of emulsion used. Typically, pure photopolymer emulsions will be most effective at 2-4 screens in the reclaim cycle and diazo/dual-cure emulsions will be most effective at 4-6 screens in the reclaim cycle.
Technical Sheets / Safety Data Sheets / Documents
FREQUENTLY ASKED QUESTIONS
Reviews
Only logged in customers who have purchased this product may leave a review.
You May Also Like
Related products
-
Printers Choice Emulsion Hardener – Water-Resistance Booster for Screen Printing Emulsions
Price range: $29.99 through $64.99 -
Murakami 901 Blockout Red – Fast-Drying Screen Blockout for Professional Screen Printing
$43.86 -
Blue Blockout Pen – Pinhole & Touch-Up Pen for Water-Based Screen Printing
$14.99
Reviews