AWT Pro Angle 1 Single Sided Scoop Coater – Precision Single-Edge Scoop Coater for Emulsion Application

Using the AWT Pro Angle 1 Scoop Coater to apply emulsion to your screen evenly is a straightforward process. Here are step-by-step directions to help you achieve optimal results:

1. Prepare your screen: Make sure your screen is clean, dry, and free from any debris. Ensure that the mesh is tightly stretched and secured in the frame.

2. Prepare your emulsion: Mix your emulsion according to the manufacturer’s instructions. Ensure that it is well-mixed and free from any lumps or bubbles.

3. Set up your working area: Choose a well-lit and controlled environment for coating your screen to minimize the risk of contamination. You may want to use a light table or a clean, flat surface with a backlight for better visibility.

4. Position the AWT Pro Angle 1 Scoop Coater: Hold the coater with the angled side facing up and the handle in your dominant hand. Position yourself comfortably in front of the screen, ensuring a stable stance.

5. Load the coater: Carefully pour your prepared emulsion into the trough of your scoop coater, ensuring that the entire scoop is filled evenly. Avoid overloading the coater, as this may lead to excessive emulsion application.

6. Beginning the coating process: Starting from the bottom edge of your screen, place the coater flat against the mesh. Tilt the coater slightly towards the mesh to ensure optimal contact and even distribution.

7. Apply gentle pressure: With a smooth and controlled motion, drag the coater upwards along the screen, maintaining constant contact and applying even pressure. This motion allows the emulsion to be evenly spread across the mesh.

8. Coat in one pass: Aim to complete the coating process in a single pass. However, if necessary, you can use an additional pass to achieve a desired thickness or to rectify any missed areas.

9. Finish with a feathering technique: As you approach the top edge of the screen, tilt the coater even more to create a feathering effect. This technique helps to taper the emulsion coating, preventing excessive buildup at the edge.

10. Inspect and correct any imperfections: After coating, carefully inspect the screen for any areas of unevenness, thin spots, or drips. Use a clean and dry brush or a scoop coater blade to make any necessary touch-ups or adjustments.

11. Dry the coated screen: Place the coated screen in a clean, dust-free area, preferably with good air circulation. Allow the emulsion to dry completely according to the emulsion manufacturer’s instructions.

By following these directions and utilizing the AWT Pro Angle 1 Scoop Coater, you can achieve precisely coated screens, enabling you to produce high-quality prints in your screen printing process.