Matsui HM Discharge White Ink

Application:

• Print through fine screen mesh up to 305 mc in (120 mc cm) when cured at 320°F (160°C), HM Discharge White produces the softest prints achievable in textile screen printing today.

Special Recommendations:

HM Discharge White should be mixed in clean vessels using clean mixing blades and utensils. Any contamination from other ink sources or non-approved additives could make HM Discharge White test positive for restricted PVC’s.

• HM Discharge White can be dry cleaned or ironed
• Use Retarder MG 1-5% to help with open time in the screen
• Use Fixer WF-N 1-5% to help with wash fastness
• Use Softener MG 1-4% to help penetrate in to the garment
• Use Discharge Agent up to 10% to activate
• Use RV Additive 1-3% to reduce viscosity

Matsui HM Discharge White (Formally known as DSFP Discharge White)

• Wet Ink Tack | Low
• After Flash Tack | Low
• Printability | Excellent
• Surface Appearance | Matte
• Opacity/Viscosity | Low/Low
• Bleed Resistance | None
• Flash Temperature | 160°F (71°C)/decreases with deposit thickness
• Cure Temperature | 320°F (160°C)
• Squeegee Hardness | Medium
• Squeegee Blade | Sharp
• Squeegee Angle | 45 degrees to screen
• Squeegee Speed | Medium
• Underlay | N/A
• Emulsion | Direct or indirect
• Mesh Count | 110-305 mc in (43-120 mc cm)
• Thinner | RV Additive
• Thickener | N/A
• Storage | 65°F to 95°F (18°C to 35°C). Avoid direct sun.
• Cleanup | Water and mild soap or detergent
• Color Range | White
• Substrate Type | Cotton
• Substrate Color(s) | Light, Medium and Dark Fabrics

Matsui DSFP White MSDS

Matsui HM Discharge White