Matsui Hydrochromic White Disappearing Water Base Ink – Invisible Design When Wet

For best results, print through mesh up to 110 mc in (43 mc cm) and cure at 320°F (160°C). Witness the softest prints achievable in textile screen printing today, as Matsui Hydrochromic White lends an exceptional touch to your fabric creations.

To ensure the ink’s top-notch performance, it’s vital to mix Hydrochromic White in clean vessels using clean mixing blades and utensils. Avoid any contamination from other ink sources or non-approved additives, ensuring compliance with the highest industry standards and avoiding restricted PVC’s.

Enhance your screen printing experience with the following special recommendations: Incorporate Retarder MG (1-5%) for extended open time in the screen. Utilize Fixer WF-N (1-5%) to boost wash fastness, ensuring your prints withstand repeated washings. Add Softener MG (1-4%) to achieve better ink penetration into the garment, resulting in vibrant and long-lasting prints. Enhance ink thickness and control by using Thickener B (.25-1%). Achieve optimal viscosity with RV Additive (1-3%), reducing viscosity for efficient printing.

Technical Data Sheet:

• Wet Ink Tack: Low
• After Flash Tack: Low
• Printability: Excellent
• Surface Appearance: Matte
• Opacity/Viscosity: High/Low
• Bleed Resistance: None
• Flash Temperature: 160°F (71°C)/decreases with deposit thickness
• Cure Temperature: 320°F (160°C)
• Squeegee Hardness: Medium
• Squeegee Blade: Sharp
• Squeegee Angle: 45 degrees to screen
• Squeegee Speed: Medium
• Underlay: N/A
• Emulsion: Direct or indirect
• Mesh Count: 80-110 mc in (32-43 mc cm)
• Thinner: RV Additive
• Thickener: Thickener B
• Storage: 65°F to 95°F (18°C to 35°C). Avoid direct sun.
• Cleanup: Water and mild soap or detergent
• Color Range: White
• Substrate Type: Cotton
• Substrate Color(s): Light, Medium and Dark Fabrics

Embrace the captivating allure of Matsui Hydrochromic White and captivate your audience with prints that magically appear and disappear, creating a unique and unforgettable experience. Elevate your designs with this innovative ink, where creativity knows no bounds.

Note: The printer must test the ink before a production run. River City Supply and affiliates are not responsible for dye migration or misuse of this product. It is imperative for the printer to test and ensure the ink is properly cured and opaque enough to prevent dye migration on particular fabrics.

Matsui Hydrochromic White Technical Data Sheet